New Products News

APR/2012

Radius type are added for Deep Evolution series!

• Launching with a reasonable price!
• Total 326 sizes.
• Minimum corner R size of 0.02mm also in lineup!

• Details
• Down Load（PDF 9.0MB)

APR/2012

Small dia. φ1~φ1.5 are added! Total 127 items!

• Flute shape provides both rigidity and cutting performance.
• No chattering even during high-speed machining.
• Machined surface roughness of bottom is also good.

• Details
• Down Load（PDF 5.5MB)

New PVD Caoting series for indexable tools !

Grade for processing high-hardness materials JP4005
Grade for processing stainless-steel materials JM4060
General purpose for steel GX2140

• Details

JAN/2012

New End Mill series for Stainless steels!
Expanded items!! Long and Corner radius type are added.

Epoch SUS Multi

Versatility in both roughing and finishing applications. Realization of long-tool-life & stable machining by innovative cutting edges design.

Epoch SUS Wave

Realization of stable machining even in low-rigidity situations including spindle, clamping, parts geometry.

• Details
• Down Load（PDF 10.9MB)
• Watch movie on YouTube

JUL/2011

Most suitable for high-performance machining by high-speed dry cutting!

• Provides high-performance machining (High-speed machining)
• Reduces welding to work material.
• Reduce chipping and breakage

• Details
• Down Load（PDF 5.3MB)

JUL/2011

Further evolved than the popular Epoch Deep Series!

• Flute shape increases resistance to breakage.
• Improved compound neck shape.
• Abundant lineup, Total of 608 items!

• Details
• Down Load（PDF 7.8MB)
• Watch movie on YouTube

JAN/2011

Epoch CBN Radius, Size expanded to a total of 46 items!

• Additional corner R size for machining of fine corners, Full line up of short under neck lengths with high rigidity<
• Flute shape with low cutting force provides high-quality machined surface roughness!

• Details
• Down Load（PDF 14.9MB)

JAN/2011

New item for selected dealers.

• TH coating 48 items and
  SD coating 94 items are added!
  Total 188 items.
• The long-awaited standardization!
• Enables ultra-deep drilling of minute holes.

• Details
• Down Load（PDF 12.3MB)
• Watch movie on YouTube

JAN/2011

New 2-flute and 3-flute manufacture stock products!

• 2-Flutes type : Provides stable processing even for ultra-high-speed machinig center.
• 3-Flutes type: Provides high-efficiency processing for general-purpose machining center.

• Details
• Down Load（PDF 6.0MB)

OCT/2010

Epoch Thread Mill

• Enables stable thread-cutting of hardened materials with hardnesses of 45HRC or higher.

Epoch D Thread Mill

• Enables a single tool to cut the pilot hole and threads at the same time in hardened materials with hardnesses of 45HRC or higher.

• Details
• Down Load（PDF 5.3MB)
• Watch movie on YouTube

OCT/2010

Low cutting force geometry is realized, due to unique sheet shape!

• Cast irons, aluminum alloys, steels and difficult to machine materials can be machined!
• Multi-flute type is also lineup.

• Details
• Down Load（PDF 2.9MB)

SEP/2010

Reduces chattering vibrations to provide high-efficiency machining!

• Enables stable machining even at long overhang!
• Damping effect increases productivity!

• Details
• Down Load（PDF 2.6MB)

AUG/2010

Enables plunge boring of not only flat surfaces but also of sloped surfaces!

• Tip angle of 180° (flat) enables plunge boring of not only flat surfaces but also of non-flat surfaces (sloped surfaces, etc.)
• Special flute shape reduces breakage or chipping of cutting flute to enable stable machining.
• Special groove shape provides smooth chip discharge, eliminating problems due to chips.

• Details
• Down Load（PDF 2.4MB)

New PVD Caoting series for indexable tools !

JP4020 for machining pre-hardened steel or tempered steel!!
JS4060 for high-efficient machining of mild steel!

• AUG/2010   ASM、ASPV、BCF type inserts are added！
• MAR/2010   AHJ, AHU type inserts are added！
• SEP/2009    ASF, ASRF, AHR, AR, ASB type inserts are added！
• AUG 2009    ASRT, ASR, ASR type inserts are New release！

• Details

Jun/2009

Add a sharp edged insert for titanium cutting!

• Optimized insert distribution further suppresses chattering.
• Nicked inserts enable heavy milling without chattering.
• JS & JX coatings provide long tool life

• Details
• Down Load（PDF 5.0MB）

May/2010

Uses low-resistance flute shape to enable high-efficiency roughing of high-hardness materials.!

• Positioning that covers the roughing of high-hardness materials with conventional tools.

• Details
• Down Load（PDF 2.7MB）

Apl/2010

Introducing new small dia. (φ2～φ2.93) （03,15,20,30WHNSB-TH)

• Completely non-step to ultra-deep (L/Dc=30) holes!
• NSB specially shaped grooves enable quick chip discharge!

• Details
• Down Load（PDF 3.9MB）
• Watch movie on YouTube

Mar/2010

New coating with amazing adhesion and wear resistance!

• New coating with amazing adhesion and wear resistance!
• Can cover the entire region of past general-purpose products.

• Details
• Down Load（PDF 2.7MB）

SEP/2009    Square, semi-long shank types are added!!
AUG/2009    φ16 and φ20 are added to Square, straight type!
JUN/2009    Epoch Mirus Series New release!

Amazingly high efficiencies!
Amazing miracles!!
Amazing End Mill ! !

• Effectively reduce vibration and achieve high efficiency!
• Double gush guarantees high performance in vertical and horizontal feed!
• High heat-resistant was achieved by the New TH coating.

• Details
• Down Load（PDF 3.1MB)
• Movie (WMV9形式)